Wood Floor Sanding

Professional wood floor sanding for a smooth, refined and beautifully restored finish.

Introduction to
Wood Floor Sanding

Floor sanding has never been so easy! Our specialist equipment guaranteed to produce excellent sanding quality for any wooden floor in and around your house. Over time and even with careful use, hardwood floors can develop splits or cracks in the wood, gaps between the boards, buckling, dents, warps and scratches. Anyfloor has many years of experience and certified by PALLMANN in wood sanding thus you can be confident that you receive the best possible service.

"Thanks again for the nice job, our wood floor looks great!" - J Smith, West Hampstead

This is how we do it:

1. PREPARATION OF THE FLOOR BEFORE SANDING

We will inspect the floor to ensure all nails are well below the wood surface. All loose board will be secured before the floor sanding commences.

2. HIGH-FILTRATION VACUUM

Removal of dry soil and particles that might cause damage to the wood during the floor sanding process.

3. REPAIRING

Moving or damaged board replacement , nail punching, etc.

4. FILLING

Filling gaps and holes with a floor dust and resin mix.

5. SANDING OF THE MAIN FLOOR AREA

The system we use is 99.9% dust free as we use an advanced extraction system.Different grit values on the bell sander will ensure a high quality finish.

6. EDGES AND DETAILED SANDING

Our edging sander delivers a uniform finish to your wood floor including all edges and hard to reach places such as under fixed furniture and radiators.

7. FINAL FINISHING: ROTARY SANDING

A super fine grit floor sanding system will deliver a superior and even finish to the whole floor area. This is done by means of a rotary sander.

8. FINE DUST REMOVAL

Highly efficient vacuum system is used for the thorough removal of any dust particles from the freshly sanded wooden floor

9. LACQUER OR OIL FINISH (Choose option A or B)

A- LACQUERED FINISH: Application of a Primer to the sanded floor followed by one coat of water based lacquer. Once the first coat has cured, the floor will be prepared for a further 2 coats of lacquer. Be aware that it will take up to 8 hours* for the floor to cure enough to allow light foot traffic. Furniture can only move back 24 hours* after foot traffic has commenced. (Avoid at all cost dragging furniture on a freshly lacquered floor surface.) * Curing and drying time depends on weather conditions and air flow.

B- OIL FINISH: Two applications of hard wax oil on your wooden floor will deliver a beautiful natural finish that is moisture and dirt resistant. Be aware that if will take up to 4 hours* for the floor to cure enough to allow light foot traffic. Furniture can only move back 24 hours* after foot traffic has commenced. (Avoid at all cost dragging furniture on a freshly oiled wood floor surface.)

Wood Floor Sanding

Introduction to
Wood Floor Sanding